An IK rating identifies a defined degree of enclosure protection against external mechanical impact under the applicable test and product requirements. A buyer needs the exact enclosure configuration, standard edition, impact severity and evaluation criteria beside the code. The associated energy is expressed in joules. Interpreting a report also requires its mounting arrangement, tested surfaces, closures and post-test observations. For an export product page, preserve the construction and conditions that support the stated rating so the buyer can establish whether the offered variant matches the evidence.
Identify the assembly behind the code
Consider a fictional enclosure range with a solid door, a transparent-window door and an optional protective grille. A catalogue gives the whole range one IK heading. The buyer needs to know which assembly was examined and which variants the supporting assessment covers.
Start with the report's sample identity and configuration. Follow its drawing or assembly reference to the offered door, window, hinges, locks, seals, entries and accessories. An identical external dimension can coexist with a different construction at an impact location.
Next, identify the state in which the enclosure was mounted and closed. A technical review should connect that state to the installation and use described in the product documentation. The report and catalogue need a shared configuration reference that a reviewer can follow.
This makes the purchasing question concrete. Ask whether the offered assembly falls within the documented scope and request the supporting assessment for any relevant change.
Read the code through its stated edition
IEC's catalogue identifies IEC 62262:2002+AMD1:2021 as the consolidated publication concerning enclosure protection against external mechanical impacts. Its scope ties application to equipment whose specific standard establishes that protection. Preserve the equipment and standard relationship when describing a result. IEC 62262 consolidated publication
The 2021 amendment includes IK11 in its code table. Selected values from that table are given below. The table provides energy classes for the code's application, with the actual test and evaluation remaining attached to the relevant requirements. IEC 62262 Amendment 1 preview
| IK code | Associated impact energy |
|---|---|
| IK08 | 5 J |
| IK09 | 10 J |
| IK10 | 20 J |
| IK11 | 50 J |
A report applying an earlier edition needs to retain that edition. The technical owner decides the relationship between that evidence, the current offered assembly and the purchasing requirement. An editor can preserve the identifiers and raise the question without changing the underlying test claim.
Keep the hammer-test reference current and specific
IEC currently lists IEC 60068-2-75:2014+AMD1:2025, corrected version 2025-12, for hammer tests. Its public description identifies three coordinated methods and prescribed impacts defined by energy and direction. Those particulars explain why the test reference and declared procedure matter beside an energy value. IEC hammer-test publication
Request the actual procedure used in the report, including the specified apparatus, impact locations, directions and sequence required by the applicable documents. The responsible laboratory or conformity-assessment party should explain how those requirements were applied to the sample.
An energy calculation can help an engineer interpret the scale of a stated severity. The full procedure establishes how the defined severity is applied and evaluated. A purchasing summary should give each of those records its own role.
Work through the energy units carefully
A joule is an energy unit. In elementary mechanics, gravitational potential energy for a simple idealized vertical change can be calculated as mass multiplied by gravitational acceleration and height change.
Use a fictional arithmetic example with mass 5 kg, acceleration 9.81 m/s² and height change 0.4 m. The assumed acceleration is explicitly rounded for this exercise.
```text
E = m × g × h
E = 5 kg × 9.81 m/s² × 0.4 m
E = 19.62 J
```
The dimensional result is kg·m²/s², equivalent to joules. This exercise calculates ideal potential-energy change from invented inputs. An actual impact test follows its specified apparatus, energy setting, tolerances and procedure.
Force requires further information. For another fictional illustration, assume exactly 20 J is represented by the area under a resisting force-displacement curve over 0.002 m. The corresponding displacement-average force is calculated below.
```text
Average resisting force over the assumed displacement = 20 J / 0.002 m
Average resisting force = 10000 N
```
With an assumed 0.004 m displacement and the same idealized energy, the corresponding average would be 5000 N. A peak-force value would require the force history. The energy alone leaves that history unresolved.
These examples supply unit interpretation and model assumptions. They provide no enclosure test, apparatus design, product qualification or physical impact trace.
Evaluate the condition after impact
Ask which observations establish the reported outcome. The applicable product requirements can concern functional and protective properties as well as visible damage. Keep the actual criteria beside the observations so a later reviewer can follow the decision.
The 2021 IEC 62262 amendment supplies a fallback criterion concerning damage that impairs the specified IP code when other criteria are absent. This makes the relationship between impact evaluation and the specified ingress protection relevant to the report. The product's applicable requirements determine the actual assessment.
For a windowed enclosure, the technical record should identify the actual examined condition and any required checks concerning the window, closure and protected space. Where the report includes photographs, retain their location and sample references. An image of one intact area leaves other required observations to be located in the record.
Cleaning compatibility is another application question. Keep the cleaning medium, temperature, method and assembly state connected to their own supporting evidence. The existing IP67 cleaning guide explains that purchasing review in detail. Enclosure cleaning specification guide
Review a configuration change before reusing the claim
A changed door material, opening, protective accessory or fastening arrangement should lead the technical owner to review the supported scope. The relevant question is which assessment covers the offered configuration and whether additional evidence is required.
In the fictional enclosure range, suppose the retained report identifies a closed solid-door sample. The catalogue editor receives a request to apply its rating to a larger window option. Record the proposed difference and send it to the authorized technical owner for assessment.
The content team can then publish the approved scope and identify the variant clearly. It should also coordinate the product page, downloadable sheet and distributor summary so the same assembly reference travels with the code.
Keep the original report and its revision history. A later configuration assessment can refer back to it through a documented relationship. The existence of a revised marketing page establishes the public wording at that time, while the technical record supplies the basis for the scope decision.
Assemble the buyer's review pack
- Identify the offered variant. Record the model, relevant drawing or assembly revision and required accessories.
- Locate its evidence. Obtain the report or approved assessment that connects the offered variant to the stated code.
- Record the applicable documents. Preserve the product requirements, IK standard edition and actual hammer-test procedure used.
- Check the tested configuration. Follow the mounting, closure state, examined areas and relevant specimen details through the record.
- Follow the evaluation. Match the prescribed criteria to the retained post-test observations and disposition.
- Approve the public statement. Have the technical owner confirm the supported variant and qualifiers, then check the English page and downloadable sheet together.
As an editorial acceptance exercise, ask an uninvolved reviewer to identify the door variant, applicable edition and outcome criteria from the public statement and its supporting pack. Then ask them to distinguish the recorded test from the fictional energy examples above.
Xindar's manufacturing export content work can help organize approved enclosure evidence into English explanations and inquiry paths. The manufacturer and responsible technical parties approve the classification, test interpretation and application decision. A useful project brief names the configuration fields and supporting records that must survive translation and publication. Xindar manufacturing services
Frequently asked questions
What energy is associated with IK10?
The cited IEC 62262 amendment table associates IK10 with 20 J. Preserve the actual edition, configuration and evaluation behind a product's stated result.
Is IK11 included in the cited standard version?
The 2021 amendment includes IK11 and associates it with 50 J. Check which version governs the actual purchasing requirement and evidence.
What force corresponds to a 20 J impact?
Force interpretation requires further information about displacement and the force history. The fictional 20 J examples illustrate how an assumed displacement changes a displacement-average value.
Which enclosure details belong next to the rating?
Identify the offered and supported assembly, including the relevant door or window variant, closure state and accessories, with a reference to its technical evidence.
Who approves the scope after a design change?
The authorized technical owner and relevant assessment parties evaluate the changed configuration. The English content should preserve their approved conclusion and evidence reference.
Sources reviewed November 15, 2026. The IEC catalogue descriptions and the selected page of the 2021 amendment support the standard identifiers, code energies and bounded evaluation discussion. Actual conformity work uses the applicable complete documents. The enclosure range, masses, displacements and calculations are fictional teaching examples.
